Anjeka 8104 Styrene Emission Suppressant BYK 750 Reduces Styrene VOC Emissions

Styrene emission suppressant for unsaturated polyester resins, isophthalic acid resins, and vinyl ester resins. Does not affect the interlayer adhesion of laminating polyester resins.

Typical Physical Chemistry Data:

The values given in this data sheet are typical values and do not constitute product specifications.

Sensitive to temperature. Store and transport within a temperature range of 20–50 °C. Separation or turbidity may occur during storage and transportation. Disperse evenly before use.

Room-temperature curing resin systems

Product Features & Benefits

• Strong VOC Suppression: Significantly reduces styrene VOC emissions during curing; improves workshop air quality, supports environmental compliance, and reduces raw material loss.
• No Loss of Interlayer Adhesion: High solubility, does not form a hard surface film; prevents delamination, whitening, or adhesion failure in multi-layer lamination.
• Improved Surface Quality: Reduces tackiness, pinholes, and orange peel; enhances surface smoothness and gloss.
• Process-Friendly: Added at room temperature, easy to disperse; does not significantly increase viscosity or interfere with curing.

Anjeka-8104 reduces styrene emission without affecting interlayer adhesion, and is also highly effective in isophthalic acid resins and vinyl ester resins.

0.3–1% additives (as supplied) based on total formulation.

The above recommended levels are for reference only. The optimum dosage should be determined through a series of application-related tests.

Anjeka-8104 must be stirred thoroughly before use to ensure product uniformity. Under continuous stirring, Anjeka-8104 should be added to the resin before other formulation components. To ensure that the optimal crystal structure of Anjeka-8104 is not affected, the product must not be melted.

• 50 kg plastic drum
• 200 kg plastic drum (with hoop/ring)

• Respond to inquiries within 24 hours.
• Superior quality products at competitive prices.
• Strong R&D and technical support.
• Dedicated professional team service.
• Flexible customized production for various packaging options.
• On-time delivery with no delays.

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

• Stable large-scale production with enhanced quality control
• Lower unit production cost

• Contract manufacturing
• OEM / ODM partnerships