ANJEKA-7306 Surface Additive Organosilicon For Plastic & Solvent-Based Room-Temperature Cure Coatings

ANJEKA-7306 is a surface additive designed for use with plastic and solvent-based coating systems that cure at room temperature and contain organosilicon. It significantly reduces surface tension and excels at wetting substrates, preventing shrinkage holes and enhancing surface smoothness.

Chemical Composition: Polyether-modified polydimethylsiloxane solution.

(The data provided on this sheet are typical values and not technical specifications of the product.)

Storage below 5℃ may cause layering or turbidity. Heat to 20℃ and mix thoroughly. Storage time should not exceed 12 months.

Compared to silicone oil, this additive is safe to use. However, testing for stability, recoatability, and shrinkage tendencies in the corresponding system is recommended before extensive use.

This organosilicon additive significantly reduces the surface tension of coating systems, enabling them to effectively wet challenging substrates. It improves receptivity to dust and overspray, and increases surface smoothness. It also reduces the sensitivity of wood and furniture coatings to airflow and improves the orientation of matting agents.

This additive is suitable for all solvent-based systems.

0.1% - 0.5% additive levels (based on the total formulation).

(The above data represent empirical amounts, and optimal levels should be determined through a series of experiments.)

The additive can be added at any stage of the production process — either during or after. For ease of measurement, it can be pre-diluted.

25 kg Iron drum

180 kg plastic drum

• Reply within 24 hours.
• High-quality products and reasonable price
• R&D technology support.
• Professional team service
• Customiszed production for different package
• No delay on shipment

We are building a new large-scale production base strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.

Benefits to our customers and collaboration partners:

• stable large-scale production, better quality control
• lower production unit cost

Collaboration Opportunities:

• contract manufacturing and OEM/ODM collaboration opportunities