Evidenziare:
liquid rheology agent DESCRIPTION
Anjeka-4420 is a liquid rheology additive for water soluble, dispersions and emulsions to produce a high degree of thixotropic fluidity and improve anti-sagging and anti-settling properties. This additive can also be added after, can be applied to water, water and alcohol et her, alcohol solvent mixture system.
PRODUCT DATA
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not technical specifications of the product.
| Chemical composition: |
modified polyurea solution. |
| Density g/cm³ (23℃) |
1.00-1.20 |
| Appearance |
Light yellow to brownish yellow liquid |
| Viscosity cps (25℃) |
100-1500 |
| Active ingredient (%) |
52 |
Solvent N-methyl pyrrolidone
STORAGE and TRANSPORT
Temperature sensitive, store under dry conditions. A slight appearance of turbidity may occur during storage, but it does not affect the rheological effect. Storage time is not recommended to exceed 12 months.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
When added to the coating system under stirring, the additive will produce a three-dimensional network structure, forming a thixotropic flow behavior ideally suited to prevent settling and anti-sagging properties without affecting leveling.
RECOMMENDED LEVELS
0.2%-1% based on total formulation to prevent settling.
0.5%-2% based on total formulation to prevent sagging, but this depends on the overall solids of the formulation.
The above figures are empirical and optimum levels should be determined through a series of trials.
INCORPORATION AND PROCESSING INSTRUCTIONS
This additive should be added to the coating system under moderate shear to ensure uniform mixing and rapid dispersion. It does not require specialized temperature control and can be added to the abrasive stage, but is also suitable for post-addition to regulate viscosity. If the additive is suitable for this system, the rheological effect will increase significantly, it depends on the time and polarity, generally the rheological effect can be evaluated 2-24 hours after mixing.
SPECIAL NOTES
If it is used with desiccants, discoloration may occur, which may be due to the formation of metal complexes. Rheological effectiveness in this case should be evaluated.
Under standard dosing, there is no negative effect on yellowing. In suspected systems yellowing and higher additive dosages should be evaluated.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
Our Certifcate&Patents
Il tuo messaggio deve contenere da 20 a 3000 caratteri!
