Anjeka6500A general-purpose dispersant copolymer containing acidic groups equivalent to BYK110 dispersion of titanium dioxide and inorganic pigments

ANJEKA-6500A general-purpose dispersant dispersing inorganic and organic pigments

GENERAL DESCRIPTION

Anjeka-6500A is a copolymer solution containing acidic groups and is a dispersant for solvent-borne medium/high polarity resin system coatings and inks, and is suitable for dispersing titanium dioxide and inorganic pigments.

PRODUCT DATA

Chemical composition: Copolymer solution containing acidic groups.

Typical physical and chemical data:

The data given on this data sheet are typical values and are not technical specifications of the product.

Appearance Colorless to brownish yellow liquid

Acid value (mg KOH/g) 50-100

Density g/cm³ (23℃) 0.90-1.10

Viscosity cps (25℃) 5-250

Active ingredient (%) 50

Solvent xylene/isopropyl alcohol

STORAGE and TRANSPORT

Please stir well before use, delamination or turbidity may occur when the temperature is lower than 15℃, heat to 30℃-40℃ and stir well.

Storage time is not recommended to exceed 12 months.

SPECIAL NOTES

The high acid value of the product may catalyze the cross-linking of the baking paint system. Viscosity rise during storage of the paint system should be checked.

APPLICATION GUIDELINES

Coating industry and printing inks

Properties and Advantages:

The additive unflocates and stabilizes the pigments by means of spatial site resistance. Due to the small size of the deflocculated pigment particles, multi-color systems are free of color float and bloom, thus increasing the gloss, color strength, transparency and hiding power of the coating. The additive reduces viscosity, thus improving flow and allowing for higher pigment additions. When used for electrostatic high speed spin coating of inorganic pigments, it significantly reduces haze.

APPLICATION SECTORS

This additive is recommended for stabilizing inorganic pigments, especially titanium dioxide, in solvent-borne and solvent-free coatings as well as in printing inks. Due to its anionic character, it is ideal for acid-catalyzed systems (e.g. coil coatings).

RECOMMENDED LEVELS

The amount of additive (in purchased form) is based on the pigment:

Titanium dioxide: 2%-4%

Inorganic pigments: 5%-10

The above data are empirical and the optimum dosage should be determined through a series of tests.

INCORPORATION AND PROCESSING INSTRUCTIONS

In order to obtain the best performance, the additives should be added to the abrasive before the pigments.

PACKAGING

-25kg iron drum with inner coating

-200kg ring plastic drum

Our Services

1. Respond to inquiries within 24 hours.
2. Premium quality products at competitive prices.
3. Advanced R&D and technical support.
4. Dedicated professional team for personalized service.
5. Flexible customized production tailored to your packaging needs.
6. On-time delivery with no shipment delays.

Our team:

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships